New 3D printed dragon door bell case is available is available at my shop.
This sculptural door bell case was carefully sculpted digitally and then 3D printed in grey nylon.
It combines the clean optics of modern technology with a classic and ornate look.
Also it’s always good to have a mighty dragon guard your home!!!
The stainless steel pushbutton is a standard size with an outer diameter of 19,4 mm and a red „glowing“ LED-ring.
For the LED ring in the push button to glow, there has to be an extra 12 V DC power line (2 wires) in addition to the wires that work the actual bell! Maybe check with your electrician!
Since my little Dragon cabinet handle was successfully crowdfunded on Kickstarter I was busy „shrinking“ my already published dragon doorhandle 10.
I had to shrink the handle to a smaller size and making some necessary adaptions and structural reinforcements for the 3D printed cabinet handles.
All my Kickstarter backers will get a limited edition of the Dragon cabinet handle in „polished nickel steel“, once the prototypes have been 3D printed to my satisfaction.
Do you want to get noticed in advance when I´m launching a new Crowdfunding campaign ( for those attractive early bird offers… ) ?
Or get monthly updates about my work and new releases?Then please sign in for my free newsletter! (right here, the form on the right side )
I just released my new dragon candleholder LUX DRACONIS 2
Keeper of the flame.
3D printed in steel.
This wall hanging candle holder will enchant your home.
The body of the beast is spiraling around the candle, while the wings form a shell that casts wonderful shadows on your wall.
Mounting: LUX DRACONIS 002 has a hole on the back and can simply be hung on a nail or a screw ( see image above).
LUX DRACONIS 002 is available here !
dragon cabinet handle
So you´re looking for a bit of magic in your life ? With this tiny dragon cabinet handles you can turn your cabinet into a mystic piece of furniture and the simple act of opening a drawer into an exciting experience. Or your childrens room into an enchanted playground. For it is said that touching a dragon brings you luck. And there is no need to fear: This dragon cabinet handles are so tiny, there is no danger inolved…
The cabinet handles are about 72 mm long can be mounted with 3mm screws.
Actually they are miniature versions of my dragon doorhandle 005.
Of course the dragon cabinet handle is available in both directions!
The one looking to the right is here.
And here is the one looking to the left.
This is my new work :
LUX DRACONIS 003 – a 3D printed candleholder
The first of an upcoming series of dragon-themed 3D printed candleholders.
The beauty of this little tea light holder not only lies in the design of the dragon, but also ( and maybe even more) in the wonderful shadows that are painted on the wall, once a candle is lit.
This nylon dragon can hold a standard Tea light of 39 mm (1 ½“) diameter.
It has a small hole in the back, on which it easily can be hung on a nail or a small screw.
It´s available here:
This doorhandle can turn every door into a magic portal. The dragon sits on the spindle, as if he is a guardian of something.
His wings are decorated with some organic, ornamental lines, as are his legs and head. The shaft shows some linear ornaments. Maybe these are some ancient runes…
This pictures and the video show the dragondoorhandle 009 in polished grey steel.
Other available finishes are: steel, matte black steel, matte gold steel, polished gold steel, polished nickel steel.
This doorhandle is designed for the 8×8 mm square spindles that are used in most european countries.
This doorhandle is available at my shapeways shop.
The dragon is fixed to this rods in the old-fashioned way: with a steel pin, that runs through the square rod and locks the doorhandle to the rod. ( see video)
I just released a new dragon doorhandle. It´s my first pull doorhandle.
And it shows a little dragon hatching.
Embedded in a mysterious structure, the beast to be is cracking it´s egg and is looking onto an unknown future.
This dragon doorhandle is app. 20 cm tall and can be easily mounted to a door using M8 nuts and screws.
dragondoorhandle 01- 3D Print -Kai Bracher
You can get more info and pictures here.
This doorhandle is available at www.dragondoorhandles.com
I just got cool news:My dragondoorhandle is featured on the shapeways-blog .
Thank you guys!
dragon doorhandle no5-Kai Bracher
I just got good News!
My 3D printed dragondoorhandles are „Design of the week“ at canadian 3D-Print magazine „Fabbaloo“.
Thank you guys ! I really appreciate it !
I just released my 3D printed Dragon Doorhandle Nr 4.
It´s a fully functional doorhandle and it´s available at here.